The Check Engine Light strikes fear into the hearts of some Okotoks drivers and is totally ignored by just as many.
First, if your check engine light is flashing, that means that something is wrong that could cause severe damage to the catalytic converter or other components. Get that taken care of right away. If your check engine light is flashing, you shouldn’t drive at highway speeds, tow or haul heavy loads. Take it easy all the way to your Okotoks service center.
If the light is glowing steadily, you should keep an eye on it for a day or two. If the light doesn’t go off, schedule an appointment with your MILLER AUTOMOTIVE REPAIR service advisor to get it checked out.
Some more information on how the Check Engine Light works may be informative to Okotoks drivers. Most of your vehicle engine functions are controlled by a computer, not surprisingly, called an engine control computer. The computer is able to adjust many engine parameters for environmental conditions, engine condition and even the way you drive.
In order to make these adjustments, the computer relies on a network of sensors to provide data. The computer knows the proper operating range for each sensor. When a sensor reading is out of range the computer runs some tests and may turn on the Check Engine Light.
The computer will also try to make adjustments to compensate for some readings. If it can do so, it’ll then turn off the Check Engine Light.
If the problem can’t be resolved then the light will remain on and you should get your vehicle checked at MILLER AUTOMOTIVE REPAIR.
Our friendly professionals will plug a scanner into the on-board diagnostic port and read the trouble code stored in the computer. The trouble code will give the service advisor a starting place as he diagnoses the cause of the problem.
Stop by or give us a call.
MILLER AUTOMOTIVE REPAIR
193 Stockton Avenue
Okotoks, AB T1S 1B2